top of page
  • LinkedIn

S.No.

Services

Use of Services

 Datasheet

 Fees per day

1

IQ Modulator with dual-Polarization emulator (40GHz)

Coherent Solutions

Part Number: IQTX-40-EDP-ABC/CSL-164102

To modulate a continuous-wave laser source with RF signals generated by an arbitrary waveform generator. It enables the generation of advanced modulation formats for high-speed optical communication systems.

INR 14,000

2

Arbitrary waveform generator I (23 GHz, 64 Gsa)

Keysight

Part Number: M8195A

Used in high-speed optical communication systems to provide precise electrical RF drive signals to optical modulators for advanced modulation formats.

INR 5,000

3

LabMaster Slave Acquisition Module
 (36 GHz, 80 GS/s, 16 Ch, 32 Mpts/Ch) 

Lecroy

Part Number: LM 10-36Zi-A

For converting the analog output of the coherent receiver to digital form to carry out digital signal processing and performance evaluation

INR 6,000

4

Coherent Optical Receiver (45 GHz, C+L band operation)

Quantifi Photonics

Part Number: IQRX-1002-FC

Enables the detection of both the amplitude and phase of the optical signal using a local oscillator, allowing advanced modulation formats (e.g., QPSK, mQAM). 

INR 4,000

5

Optical Modulation Analyzer system I
 (66 GBaud (Max. Detectable)

Lecroy

Part Number: MCM-Zi

Used to evaluate the performance of optical communication links by analyzing received modulated signals. It includes built-in DSP algorithms to compensate for transmission impairments and provides key performance metrics such as Bit Error Rate (BER), Error Vector Magnitude (EVM), and Q-factor.

INR 9,000

6

Dual Polarization IQ Modulator (60GHz)

IDPhotonics

Part Number: OMFT CLASS 60

To modulate a continuous-wave laser source with RF signals generated by an arbitrary waveform generator. It enables the generation of advanced modulation formats for high-speed optical communication systems.

INR 6,500

7

Arbitrary waveform generator II (80 GHz, 256 Gsa)

Keysight

Part Number: M8199B

Used in high-speed optical communication systems to provide precise electrical RF drive signals to optical modulators for advanced modulation formats.

INR 31,000

8

Coherent receiver and Optical Modulation Analyzer system II (110 GHz, 256 Gsa)

Keysight

Part Number: N4391B

Used to evaluate the performance of optical communication links by analyzing received modulated signals. It includes built-in DSP algorithms to compensate for transmission impairments and provides key performance metrics such as Bit Error Rate (BER), Error Vector Magnitude (EVM), and Q-factor.

INR 52,000

9

Multi-core Fiber Splicer

Fujikura

Part Number: FSM-100P+

Used to splice Single-mode Fibers (SMF), Multimode fibers (MMF), Double Clad Fibers (DCF), Multi-core Fiber (MCF) and Photonic Crystal Fibers (PCF)  (per splice)

INR 3,300/splice

10

Optical Spectrum Analyzer I (C-Band)

Finisar

Part Number: WaveAnalyzer 100S

Used to measure and analyze the optical spectrum of signals, providing insights into wavelength, power levels, spectral width, and signal distortions

INR 6,500

11

Optical Spectrum Analyzer II (600 to 1700 nm, 0.02 nm (Resolution))

Thorlabs

Part Number: OSA203B

Used to measure and analyze the optical spectrum of signals, providing insights into wavelength, power levels, spectral width, and signal distortions

INR 9,000

12

Optical Sepctrum Analyer III

Yokogawa

Part Number: AQ6370E

To calibrate the skew of the coherent receiver. Skew calibration is essential for proper recovery of high speed-optical data.

INR 9,000

13

L band Lasers

Quantifi Photonics

Part Number: QP_Laser_1000_Series

1565 nm to 1625 nm Laser

INR 1,000

14

BERT(4-Channel 32 Gbps Bit-Error-Rate Tester)

Optellent, Inc.

Part Number: OPB-100G-I

4-Channel  32 Gbps Bit-error rate tester

INR 4,000

15

Electronic Spectrum Analyzer II (2 Hz - 43 GHz)

Keysight

Part Number: N9030B

Test equipment

INR 4,000

16

Vector Network Analyzer I (10 MHz - 43 GHz)

Keysight

Part Number: N5244B

Used to measure the amplitude and phase response of RF and microwave components, enabling the characterization of S-parameters, impedance, and transmission properties

INR 10,000

17

RF Source I (43 GHz)

Keysight

Part Number: N5183B

Test equipment

INR 2,000

18

Autocorrelator

Femtochrome

Part Number: FR-103XL

Used to measure optical pulsewidth from 4 fs to 100 ps at optical wavelength across 900 to 2000 nm

INR 1,000

19

Regular Splicer

Fujikura

Part Number: FUJIKURA-88S+

Used to splice Single-mode Fibers (SMF) and Multimode fibers (MMF) (per splice)

INR100/splice

20

PM Splicer

Fujikura

Part Number: FSM -100P+

Used to splice Single-mode Fibers (SMF) and Multimode fibers (MMF) (per splice)

Datasheet

INR2000/splice

21

Manpower Support

NA

INR 10,000

22

Testing using the field MCF fibers (Testbed usage)

Sterlite

INR 10,000

Equipment Usage Application

Equipment Required

21

Testing using the field MCF fibers (Testbed usage)

Sterlite

INR 10,000

21

Testing using the field MCF fibers (Testbed usage)

Sterlite

INR 10,000

bottom of page